Model XQ28/2.6 hydraulic power tong is an improved from XYQ1.8 sucker rod power tong, the sucker rod power tong is used to make up and break out sucker rod thread in Well Service.
There are following features of sucker rod power tong:
A. The structure is compact ,concise and light.Master tong is driven by low speed large torque hydraulic motor which matching with manual control valve. The backup tong just like a spanner. Total weight is approximately equal to XYQ1.8.
B. The operating is briefness and convenience with high efficiency. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong , turning the reset knob in correct direction then can make up and break out sucker rod by operating manual control valve. Two speed,snapping atlow speed, spinning at high speed . C.Large low gear torque,especially suitable for the instance that is difficult to breakout sucker rod thread.
List for Spare Parts of Sucker Rod Power Tong
| No. |
SALES
NUMBER |
DRAWING NUMBER |
Mode1 XQ28/2.6 Hydrau1ic
Power Tong |
QTY |
| PART NAME |
| 1 |
2.6.Z-1 |
GB5782-86 |
Hex Head Bolt M10×20-8.8 |
4 |
| 2 |
2.6.Z-2 |
XYQ2.6.Z.1 |
Head of Tong Unit |
1 |
| 3 |
2.6.Z-3 |
XYQ2.6.Z-1 |
Shell |
1 |
| 4 |
2.6.Z-4 |
XYQ2.6.Z-2 |
Roller |
23 |
| 5 |
2.6.Z-5 |
XYQ1.8.Z-3 |
Bearing Disc |
1 |
| 6 |
2.6.Z-6 |
GB879-85 |
Countersunk Screw M5×10 |
24 |
| 7 |
2.6.Z-7 |
XYQ2.6.Z-3 |
Roller Shaft |
23 |
| 8 |
2.6.Z-8 |
GB892-86 |
Retaining Ring B18 |
12 |
| 9 |
2.6.Z-9 |
GB70-85 |
Hexagon Socket Head Cap
Screw M5×16-8.8 |
12 |
| 10 |
2.6.Z-10 |
XYQ1.8.Z-25 |
Key |
3 |
| 11 |
2.6.Z-11 |
XYQ2.6.Z-4 |
Duplex Gear |
1 |
| 12 |
2.6.Z-12 |
XYQ2.6.Z-5 |
Sleeve (1) |
1 |
| 13 |
2.6.Z-13 |
XYQ2.6.Z-6 |
Sleeve (2) |
1 |
| 14 |
2.6.Z-14 |
GB276-82 |
Ball Bearing 105 |
4 |
| 15 |
2.6.Z-15 |
XYQ3C.Z-9 |
Bearing Disc (1) |
1 |
| 16 |
2.6.Z-16 |
XYQ3C.Z-10 |
Bearing Disc (2) |
1 |
| 17 |
2.6.Z-17 |
GB893.1-86 |
Circlip of Hole 47 |
2 |
| 18 |
2.6.Z-18 |
GB1152-89 |
Grease Cup M8×1 |
3 |
| 19 |
2.6.Z-19 |
XYQ2.6.Z-7 |
Shaft of Duplex Gear |
1 |
| 20 |
2.6.Z-20 |
XYQ3C.Z-12 |
Sleeve of Hydraulic Motor |
1 |
| 21 |
2.6.Z-21 |
XYQ1.8.Z-12 |
Internal Gear |
1 |
| 22 |
2.6.Z-22 |
XYQ2.6.Z-8 |
Gear |
1 |
| 23 |
2.6.Z-23 |
XYQ2.6.Z-9 |
Spline Gear |
1 |
| 24 |
2.6.Z-24 |
XYQ2.6.Z.2 |
Cluch Gear Unit |
1 |
| 25 |
2.6.Z-25 |
XYQ1.8.Z-17 |
Bearing Disc |
1 |
| 26 |
2.6.Z-26 |
XYQ2.6.Z-10 |
Main Shaft |
1 |
| 27 |
2.6.Z-27 |
|
|
|
| 28 |
2.6.Z-28 |
GB276-82 |
Ball Bearing 204 |
1 |
| 29 |
2.6.Z-29 |
|
|
|
| 30 |
2.6.Z-30 |
XYQ2.6.Z-11 |
Bottom Cover |
1 |
| 31 |
2.6.Z-31 |
GB70-85 |
Hexagon Socket Head Cap Screw M6×16-8.8 |
6 |
| 32 |
2.6.Z-32 |
XYQ3C.Z-20 |
Sliding Block |
1 |
| 33 |
2.6.Z-33 |
XYQ3C.Z-21 |
Spring |
7 |
| 34 |
2.6.Z-34 |
XYQ1.8.Z-19 |
Trailling Seat |
1 |
| 35 |
2.6.Z-35 |
XYQ1.8.Z-20 |
Back Guy Pin |
1 |
| 36 |
2.6.Z-36 |
GB91-86 |
Cotter Pin 4×25 |
1 |
| 37 |
2.6.Z-37 |
GB70-85 |
Hexagon Socket Head Cap Screw M12×30-8.8 |
4 |
| 38 |
2.6.Z-38 |
GB93-87 |
Spring Washer 12 |
8 |
About JC Wellhead
Jingcheng Petroleum Machinery Manufacturing Co.,Ltd was established in 2008, we are specialized in design and manufacturing of the oilfield wellhead equipment. We - YCJC are a registered supplier for CNPC, GWDC, CCDC in China and got the API certificate from 2010.
In 2012, JC wellhead jointed with ZZ TOP Oil tools to expand the international business, in order to meet the customers' various requirement, we work with other large drilling rig companies to supply the other oilfield equipments, such as drilling rig components (mud pump & parts, rotary swivel, travelling block, hook etc), handling tools ( slip, elevator, spider, casing tong, power tong, mual tong etc.) and so on.
YCJC also engaged in abroad marketing, through these years of efforts, our wellhead equipment and handling tools are exported to many countries and enjoyed good reputation from the customers.
